Strewth the spelling of English is weird!

[facthunter]

Yeah, the Scottish, My ancestors. Need Sub titles to understand them. Nev

[Marty_d]

3 hours ago, red750 said:

I contest number 1.

"Cunth" rhymes perfectly with "month".

It's what you call a couple of thugs that have just knocked your teeth out.

[red750]

https://www.facebook.com/reel/2842812786114906

[willedoo]

One thing I've noticed a lot lately while watching YouTube videos is Americans pronouncing solder as 'sodder'. Same for a noun as verb, and it seems to be wide spread across states and not restricted to certain areas. They sodder a leakey pipe so they can water their erb garden.

[facthunter]

I don't lie awake at Night thinking about how they Pronounce words. No one solders much these days . It's got LEAD in it..PLUMBUM. That's how "Plumber" is derived. Nev

[old man emu]

21 minutes ago, facthunter said:

No one solders much these days . It's got LEAD in it..PLUMBUM.

Yes. You can still get solder with tin concentrations between 5% and 70% by weight.

 

The European Union Waste Electrical and Electronic Equipment Directive and Restriction of Hazardous Substances Directive were adopted in early 2003 and came into effect on July 1, 2006, restricting the inclusion of lead in most consumer electronics sold in the EU, and having a broad effect on consumer electronics sold worldwide. In the US, manufacturers may receive tax benefits by reducing the use of lead-based solder.

 

Etymology

The word solder comes from the Middle English word soudur, via Old French solduree and soulder, from the Latin solidare, meaning "to make solid".

[pmccarthy]

Sodder and calling split pins Cotter pins both annoy me.

[old man emu]

A cotter is a pin or wedge with a flat bearing surface passing through a hole to fix parts tightly together. A split pin in the US, is a metal fastener with two tines that are bent during installation. Split pins are frequently used to secure other fasteners, e.g. clevis pins, or to secure a castellated nut.

 

       

 

A split pin is a metal fastener with two tines that are bent during installation. Split pins are frequently used to secure other fasteners, e.g. clevis pins, or to secure a castellated nut.

 

[Litespeed]

 

Cotter pins  are used to hold the carnk to the crank shaft on bicycles.

 

Generally old ones, newer are different.

[old man emu]

1 hour ago, Litespeed said:

 

Cotter pins  are used to hold the carnk to the crank shaft on bicycles. Generally old ones, newer are different.

I couldn't think of any other place where coitter pins were used. Typical applications are in fixing a crank to its crankshaft, as in a bicycle, and a piston rod to a crosshead, as in a steam engine. In mechanical engineering, a crosshead is a mechanical joint used as part of the slider-crank linkages of long stroke reciprocating engines (either internal combustion or steam). When was the last time you saw a long stroke engine or asteam engine in common use?

[facthunter]

Modern Container ships use Super long stroke ,supercharged motors that operate on something close to straight Crude oil 76 Rpm's. Nev

[old man emu]

52 minutes ago, facthunter said:

Modern Container ships use Super long stroke ,supercharged motors

They are scarce on the ground in my neck of the woods.

[pmccarthy]

In the USA they call split pins cotter pins. Everywhere.

[willedoo]

9 minutes ago, pmccarthy said:

In the USA they call split pins cotter pins. Everywhere.

It was the same in Queensland when I was growing up. Even as a young adult everyone was still calling them cotter pins, but you rarely hear it these days. Split pins has been the common term for a long time now

[willedoo]

 Google AI says they're one and the same, generally called split pins in Australia. They use AIMS Industrial Supplies as a reference. The AI also says the Brits call them split pins or split cotter pins, the Americans call them cotter pins, then it goes on to describe a true cotter pin.

https://aimsindustrial.com.au/blogs/product-guides/split-pin-cotter-pin-guide

Edited 7 hours ago by willedoo